MEI Informatics Test 34 assignments on 5 questions
Seller: Nezloy ВУЗ МЭИ
Price: 1.21 USD
Available. The final price depends on the selected options and is checked before payment.
Product description
Exercise 1
Question 1. In what form does PC (PC) receive information?
- in the form of discrete signals (digital computer);
- in the form of continuous signals (analog computer);
- Basically, in the form of discrete signals, and sometimes - in the form of continuous signals;
- basically, in the form of continuous signals, and sometimes - in the form of discrete signals
- There is no correct answer.
Question 2. What is a bit?
- the bit can take any value;
- bit is an elementary unit of information measurement, the bit value is the number 1;
- The bit is an elementary unit of information measurement, the bit value is the number 0;
- a bit is an elementary unit of information measurement, the bit value is an octal number of 2;
- a bit is an elementary unit of information measurement, the bit value is the number 0 or 1.
Question 3. To measure large amounts of information use units such as Kilobyte, Megabyte, Gigabyte. What is the kilobyte?
- 1 kilobyte = 1000 bytes, or 103 bytes;
- 1 Kilobyte = 1,000,000 bytes, or 106 bytes;
- 1 Kilobyte = 1000000000 bytes, or 109 bytes;
- 1 Kilobyte = 1024 bytes, or 210 bytes;
- 1 Kilobyte = 1048576 bytes, or 220 bytes.
Question 4. What is the difference between decimal, binary, octal and hexadecimal number systems?
- The bases of these numbers are, respectively, the numbers 10, 2, 8, 16. When writing numbers in the decimal system, digits from 0 to 9 are used; In a binary system, any number is written as a sequence of 0 and 1; in the octal system, numbers from 0 to 7 are used to write numbers; in the hexadecimal system, the numbers can be written with 16 characters - digits from 0 to 9 and Latin letters from A to F;
- The bases of these numbers are, respectively, the numbers 10, 2, 8, 16. When writing numbers in the decimal system, numbers from 0 to 10 are used; In a binary system, any number is written as a sequence of 0 and 1; in the octal system, numbers from 0 to 8 are used to write numbers; In the hexadecimal system, the numbers can be written in digits from 0 to 16.
- The bases of these numbers are, respectively, the numbers 10, 2, 8, 16. When writing numbers in the decimal system, digits from 0 to 8 are used; In a binary system, any number is written as a sequence of 0 and 1; in the octal system, numbers from 0 to 10 are used to write numbers; In the hexadecimal system, the numbers can be written in digits from 0 to 16.
- The bases of these numbers are, respectively, the numbers 10, 2, 8, 16. When writing numbers in the decimal system, digits from 0 to 9 are used; In a binary system, any number is written as a sequence of 0 and 1; in the octal system, numbers from 0 to 8 are used to write numbers; in a hexadecimal system, the numbers can be written in digits from 0 to 17. In computing, only the decimal number system is used.
- The bases of these numbers are, respectively, the numbers 10, 2, 8, 16. When writing numbers in the decimal system, the digits from 0 to 9 are used; In a binary system, any number is written as a sequence of 0 and 1; in the octal system, numbers from 0 to 8 are used to write numbers; In the hexadecimal system, the numbers can be written in digits from 0 to 16.
Question 5. The decimal number 30 will be written in the binary system as:
- 10011;
- 11110;
- 10101;
- 100111;
- 100001.
Activity 2
Question 1. An elementary unit of measuring the amount of information is:
- Byte;
- Kbyte;
- Mbyte;
- Bit;
- Eight bits.
Question 2. The following numbering systems are given: with bases 2, 8, 10, 16. A record of the form 100
- absent in the binary;
- exists in all listed;
- absent in the decimal;
- Missing in octal;
- absent in the 16th.
Question 3. If the test version on the average has a volume of 20 kilobytes (on each page of the test 40 lines of 64 symbols in each, 1 symbol occupies 1 byte), then the number of pages in the test is equal (the answer is rounded up to the whole page): 1. 1
Additional information
Activity 34
Question 1. Why is it better to use variables instead of constants?
- Since constants take up more memory;
- Since if you change the value of a constant in the source program, you will need to change each operator, in which this constant was used;
- Since when using constants, the program runs slower;
- because of the reasons listed in paragraphs 1 and 3;
- There is no correct answer.
Question 2. What is a syntax error in the program?
- This is an error caused by the mismatch of the constructions used in the program, the rules of the language;
- This is an error caused by the fact that memory is not reserved for arrays or initial values were not given to variables used in the program;
- This is an error caused by a loop, when the program can not exit the loop;
- This is an error caused by incorrect use of labels or line numbers of the program;
- There is no correct answer.
Question 3. Why do tests (test cases) and debug printing?
- to detect program errors;
- to localize program errors;
- to detect and localize program errors;
- for the preparation of documentation for the program;
- There is no correct answer.
Question 4. In which cases is the loop used for the meter?
- when the initial value of the loop control variable is known;
- when the step of changing the loop control variable is known;
- When the number of repetitions of the cycle is known before the cycle;
- When the limits of change of a variable and a step of its change are known;
- when it is known listed in paragraph 3 or in paragraph 4.
Question 5. What are the errors in the cycles?
- This is an error caused by the mismatch of the constructions used in the program, the rules of the language;
- This is an error caused by the fact that memory is not reserved for arrays or initial values were not given to variables used in the program;
- This is an error caused by a loop, when the program can not exit the loop;
- This is an error caused by incorrect use of labels or line numbers of the program;
- There is no correct answer.