126. Solving a chemistry problem

Product description

• The diluted copper solution was concentrated by passing 250.0 ml of this solution through a chromatographic column containing a cation exchanger in the H + form, the column was washed with hydrochloric acid, and the solution was brought to the mark with water in a volumetric flask with a capacity of 100.0 ml. 20.00 ml of the solution was taken into a volumetric flask with a capacity of 50.0 ml, 15 ml of a 25% ammonia solution was added, brought to the mark with water and the optical density Ax=0.48 was measured at a=590 nm and I=2cm.

Under the same conditions, the optical density of a standard solution containing 2 mg of copper was measured, and 10.00 ml of the solution was placed in a 50.0 ml volumetric flask. added 15 ml of 25% ammonia solution, brought to the mark with water and measured the optical density Ast=0.56.

Determine the mass of copper in the test solution.

Additional information

If the file does not open for you, install the Rar archiver program. Inside the archive, the solution is in WORD format.